Any problems or bugs you've expierenced post here.
Hey sorry >.< but..
It seems after completing the config file and running the program, an error comes up.
The error says:
"Component 'LVBUTTONS.OCX' or one of its dependencies not correctly registered: a file is missing or invalid"
Please help >.<
Thanks in advance!
lvbuttons.ocx should be in the same folder as the program is; if you downloaded Gremlin from this site than that file is included in the download. So make sure the file is in the same folder as the rest of the program.
If that still dont work, try start > run > regsvr32 LVBUTTONS.ocx
Thanks for reply!
Yes I downloaded this file from this site. I've already tried registering it but no good T_T;
Maybe it's cause i have vista? Could this be the problem?
Thanks in advance.
Maybe, havent ever tested my programs on vista since I use XP, try putting the file lvbuttons.ocx in ur system or system32 folder
Also try running program as admin
I think the download links are broken or somthing because when i click on the download link it says access is denied on this server
getting the samething revoke
the server on twistednet had problems, the server on darkblizz still works. Go to downloads and you can dl it from there. I;ll fix twistednet links soon.
i can only dl 2 of your products from there.. and i wasn't after those.
at the moment im not on a windows os and mac is being gay with its lame ftp client so I cant edit the permissions at the moment. If you cant wait you might try searching around other sites to see if they have the prog on their server.
Sorry about the inconvience
i think bnetdev has it...and my computer computer has gremlin but its 50 miles from here :'( hell, as soon as i get a download system up on my bnetfire site im going to add this program to it...if its ok with you.... and just so you know the gremlin from this site myst is corrupted. when i try to download it about 3/4 of the way done it gives me an error about somthing blahblahblah decoding error or w.e.
Downloading it from the Download module works fine.
All downloads from the "Download Here" topics in forums are down at the moment due to a restart on twistednet server, which hold my downloads. Everything should be back to normal very soon.
Like i said i tryed downloading it from the Download system in this forum and about at 321K it gives me an error saying content deocding has faild
works fine for me
TwistedNet server has been resolved. All Downloads now work
Hey what is the
GameType=1
MapType=1
For?
Ive set all of them from 0 to 7 and it doesnt still seem to be going on map settings
little help?
As it states in the ReadMe
QuoteGameType=The type of game Format is a one digit charecter see below
2 = Melee , 3 = FFA , 4 = 1 on 1 , 9 = Ladder , a = UMS , f = Top vs Bottom
MapType=Type of map weather sc or bw 4 = SC 5 = BW
Also have you redownloaded it lately? Because I fixed the issue where it would only post game in UMS.
I get stuck at binding connection
Here's my config file:
[Gremlin Configuration]
[LogOn]
Username=LOLAND
Pass=
Server=useast.battle.net
CdKey=
Verbyte=D3
[Game]
Username=Special_A
GameName=You spin me round baby
GamePass=
GameSpeed=6
GameType=2
MapType=4
MapSize=44
MapIcon=3
MapName=The Lost Temple
Nothing is wrong with your config. After "Binding Connection", the bot attempts to connect to a BNLS server for check revision purposes. Currently that BNLS server is hardcoded in so, at the moment the user can not change that.
Basically the BNLS server the bot trys to connect to , JBLS.org, is down which is why it stops after "Binding Connection."
Sorry for the inconvenience, but you'll have to wait until that BNLS server is back online. I'll get around to making a update to make it so you can change the BNLS server. But for now you'd have to wait until that server comes back online.
Quote from: Myst on July 25, 2009, 09:53:50 PM
Nothing is wrong with your config. After "Binding Connection", the bot attempts to connect to a BNLS server for check revision purposes. Currently that BNLS server is hardcoded in so, at the moment the user can not change that.
Basically the BNLS server the bot trys to connect to , JBLS.org, is down which is why it stops after "Binding Connection."
Sorry for the inconvenience, but you'll have to wait until that BNLS server is back online. I'll get around to making a update to make it so you can change the BNLS server. But for now you'd have to wait until that server comes back online.
Thanks for your quick responses as always, Myst. Any idea of when it's going to be up?
Uploaded new version, re-download (http://www.darkblizz.org/Forum/index.php?topic=48.msg492#msg492)
I have just downloaded the file and when I am getting this error: "Component 'mswinsck.ocx' or one of its dependencies not correctly registered: a file is missing or invalid". I am also using windows XP.
Download the OCX: http://www.ocxdump.com/cgi-bin/testwrap/downloadcounts.cgi?rt=count&path=ocxfiles/M/MSWINSCK.OCX (http://www.ocxdump.com/cgi-bin/testwrap/downloadcounts.cgi?rt=count&path=ocxfiles/M/MSWINSCK.OCX)
Put it into your System Folder
Then go to Start > Run > Type in "regsvr32 mswinsck.ocx"
[Gremlin Configuration]
[LogOn]
Username=Clanhx
Pass=
Server=63.240.202.134
CdKey=
Verbyte=D3
[Game]
Username=Clan Hx
GameName=Join Op Clan Hx
GamePass=asdf
GameSpeed=6
GameType=2
MapType=4
MapSize=44
MapIcon=3
MapName=The Lost Temple
Is this the right settings?
Yeah that seems to be fine; whats the problem?
Well I am getting "UDP 0X05 Count > 4" and I am not seeing the game appear in the selection screen. Can I have Starcraft running as well?
Yes you can run SC while using Gremlin...The last msg you should see to see if the game was created was "Game Created Successfully".
Here try this
Run Starcraft
Then Run Gremlin
Let me know what happens
Im getting the LVBUTTONS.ocx error, its in same folder, and i tried doing the run > regsvr32 crap..
neither worked.
Place that file also in your System folder and then register it again.
Hi, I'm trying to use GremlinBot with a proxy. But it seems to freeze after it says Connected to Battle.Net
I tried using it without the proxy and works fine.
My proxy is verified any help is appreciated.
is it battle.net verified? A lot of the times proxies are usually ip banned from most battle.net servers, due to other people using to them to flood/load.
Yes its bnet verified. I even tried same proxy on different bot to make sure. And it loaded fine. So i don't know
took a look at the code, unfortunately during the proxy connection it attempts to connect to a BNLS server which I hardcoded into the bot, which is JBLS.org, which is at this time a server with bad uptime. I should probably update it, to use the BNLS servers from the last update I made. (Which went through a list of servers automatically).
So thats why it stopped connecting.
ok thank you, Is there an idea when you'll have that fixed?
tonight, it takes like 26 secs.
Sweet thanks alot Myst. Btw is there a place to find on bnet. I dnt see you in op w@r or op :[
i go around the alias "Thief" on useast
ok, fixed, updated, & tested.
Redownload and you can replace the old exe with the new one.
http://darkblizz.org/Forum/index.php?action=downloads;sa=view;down=9 (http://darkblizz.org/Forum/index.php?action=downloads;sa=view;down=9)
I redownloaded and replaced exe.s but still stops at Connected to Bnet
these are the lines I get
Proxy Connected to Battle.Net
Port = 6112
Binding Connection
Proxy Connection to Bnet is Good
Connected to Battle.Net
and that's it, I wait for awhile but nothing happens? :'(
After that message you should see messages saying bots trying to connect to the BNLS servers from your BNLSList.txt.
if it reached all the way to that last message from your log, you should see BNLS message right after that no matter what.
I tested it using a proxy and it works fine. So make sure you have the most up to date version of Gremlin with all its associated files and fresh proxies.
I am getting a "Run-time Error 13, type mismatch" I am on a different computer. Am I missing files again?
Something being inputed is not the right thing being inputed. ReCheck your config to see if there are any errors. Make sure you have the latest version of Gremlin, since new files were added to it also. (Latest one should have the BNLS text file in it).
It's worked before on another computer but here are my settings.
[Gremlin Configuration]
[LogOn]
Username=clanhx
Pass=
Server=uswest.battle.net
CdKey=
Verbyte=D3
[Game]
Username=Clan Hx
GameName=Op Clan Hx
GamePass=2Clanhx2
GameSpeed=6
GameType=2
MapType=4
MapSize=44
MapIcon=3
MapName=The Lost Temple
Any chance you using a proxy?
I am not using a proxy.
Take a SS when the error comes up. Your config all looks good. Make sure you have the latest ver of Gremlin; check changelog.txt and if you have [v1.3R] then you have the latest.
I have exactly the same Problem as radioactive. Ver 1.3R i cannot upload an Image for some reason...
Thats the Error Box:
Run-time Error 13, type mismatch
at Gremlin:
Received UDP Reponce back from bnet
Sending 0x09 - Wat Port we Using
Sending 0x09 - Wat Port we Using
Sending 0x09 - Wat Port we Using
double check that your inputing the proper data in your config
I did, but maybe i oversee something, here is it:
[Gremlin Configuration]
[LogOn]
Username=oSCl]Bot
Pass=XXXXX
Server=useast.battle.net
CdKey=XXXX-XXXXX-XXXX
Verbyte=D3
[Game]
Username=oSCl]Bot
GameName=www.oldscool.at.ua
GamePass=
GameSpeed=6
GameType=a
MapType=5
MapSize=44
MapIcon=1
MapName=CommunityandMapping
I also don't use a Proxy.
Are you using "-" in your CdKey? If so remove that; example) 123-456-7896 to 123456789
Ah yea Thanks :D Btw. does Blizzard Ban your Key for using such Bots? Surely, theres always the risks, but do you know about such Stuff happened? If not, there would be a shit load of Bots online, or i'm wrong?
No blizzard doesn't ban em, they always say they will, but personally in like 5 years of battle.net none of my bot's cdkeys have ever got banned...
Bots are just emulated game clients providing all the functioning they can do plus a little more. There's always a chance to get banned; i.e lets say for example someone complaining to a blizz rep that there is a lot of spam on the gamelist. A rep could go and check and see all the spams of games since it would be kind of obvious and would disconnect the IP of those games.
But it has never happened to me so far. I would say in regards to this particular bot, Gremlin, it would be very unlikely.
Right well i love the bot but this has already been said before but the bot cannot connect through a proxy to bnet after it says connected to proxy i get the runtime error 13 type mismatch. Now after reading this thread i went and checked my config and it is fine i have fiddled with the config relentlessly trying to get it to work but to no avail. Are you sure it's the bot not the users? also i can get it to connect just fine without a proxy and have tried multiple proxies...
instead of using the dns of the battle.net server (useast.battle.net, europe.battle.net , etc) try:
useast - 63.240.202.134
uswest - 63.241.83.8
europe - 213.248.106.201
asia - 211.233.0.54
Hmmm wow it worked thanks... :P though most of the time now to get it to connect i would have to hit start once it would halt at connecting to battle.net then i would hit stop then start again and then it would work just fine so idk what that is about.
My problem is this, my program stops at "Join home channel" and then you would
any solution?
http://img269.imageshack.us/img269/3157/dibujobt.png
Double check to see if you are not using the same game name someone already has made. For testing purposes make the game name to something like "Ichigotest123" and see if that works.
now it work ^^
the problem was the game name lenght
thanks for your help. ^^
Hi. I have exactly same problem as IchigO. (http://darkblizz.org/Forum2/../../../profile/?u=1109) Always hangs on "Joining Home Channel". Tried different game names, different lengths. Never succeeded. Any help?
Regards
Hi, I have downloaded the latest version of Gremlin but I too seem to have troubles.
I do not see my game in the Starcraft gamelist when I press 'Start' on my Gremlin window.
I get the error "Proxy Failed to Connect", however I do not think/nor do I intend to use a proxy.
Here is my config (with a 'few' changes):
[LogOn]
Username=ABC
Pass=ABC
Server=63.241.83.8
CdKey=ABC
Verbyte=D3
[Game]
Username=ABC
GameName=ABC
GamePass=
GameSpeed=6
GameType=f
MapType=4
MapSize=44
MapIcon=2
MapName=ABC
After a minute or so, my Gremlin displays "Proxy Failed to Connect" again, and "BNLS Closed".
Make sure the proxy field is completely blank. When you first launch Gremlin, the proxy field is blank by default anyways.
I have to manually abuse my Backspace button in order to solve the proxy problem.
But when I log onto Battle Net with my Starcraft to see if it works, Battle net disconnects me.
It works fine on USEast and Europe.
Try running Starcraft and logging into Battle.net first, and then running Gremlin.
This bot keeps ip'ing me after it logs on, i am not on my ip limit, and even if i was i wouldn't get ip'd for it.
[Gremlin Configuration]
[LogOn]
Username=2pro[snyp]
Pass=
Server=63.241.83.7
CdKey=Verbyte=D3
[Game]
Username=Alexeistukov
GameName=Alexeistukov is gay
GamePass=
GameSpeed=6
GameType=a
MapType=4
MapSize=44
MapIcon=3
MapName=Alexei is gay
lmk if there is something wrong cause i doubt it. I dl'd this bot a while ago and it worked fine first try. I reformatted, and redl'd it yesterday and now i can't get it to work for the life of me. I have the up to date star hashes as well, and there's really not much else i can change. I am not using a proxy and using port 6112, which is unblocked with my firewall.
Well from what you posted it looks like the config file is messed up. Re-Download bot and replace the config and make sure you don't edit any of the positions/spacing.
If it continues to cause problems let me know where it exactly happens when you are disconnected/ipd.
so i read this, redl'd. re did config, and i start it, says cd key is banned. try dif cd key, then that one is in use. Try another one and i get ip'd again. here is my config, along with a s/s of where the bot got me ip'd.
[Gremlin Configuration]
[LogOn]
Username=2pro[Snyp]
Pass=
Server=63.241.83.7
CdKey=
Verbyte=D3
[Game]
Username=Clan Snyp
GameName=West Snipers - Clan Snyp
GamePass=
GameSpeed=6
GameType=a
MapType=4
MapSize=44
MapIcon=3
MapName=Clan Snypers
(http://i927.photobucket.com/albums/ad114/davidac/dsafahg.jpg)
The only thing I can think of is battle.net disconnecting you due to too many login attempts, probably from trying to keeping attempting to log into that name. Try using a different username.
Other than that, I can't think of anything else. Try a different server also just to make sure the bot is working for you.
yea so i tried dif name and everything, still gets me ip'd.
even a different server? And are you still getting disconnected after the same spot, i.e Cdkey is Good.?
Yea idk what happened but it works now, didnt change anything. Didn't re download it. So.. idk, but it works.
good to hear.
i filled this out
[Gremlin Configuration]
[LogOn]
Username=sdfg43ts
Pass=qwerre
Server=63.240.202.134
CdKey=123454545454
Verbyte=D3
[Game]
Username=BigBallSac
GameName=Nachtmuis
GamePass=
GameSpeed=6
GameType=a
MapType=5
MapSize=44
MapIcon=4
MapName=The Lost Temple
and i get this msg: Component 'LVBUTTONS' or one of its dependencies not correctly registered: a file is missing or invalid
PLEASE HELP ME
Refer to page 1 and 2 of this post. It clearly explains how to properly use and register lvbuttons
i tried page 1 and 2.. i added the LVBUTTONS.ocx to system 32 then tried it and i ended up with the same error i am running windows vista by the way
First off what bit of vista are you running:
- If 32-Bit, place LVBUTTONS.ocx in your C:\WINDOWS\system folder
- If 64-Bit, place LVBUTTONS.ocx in your C:\WINDOWS\SysWOW64 folder
Then click start > run
type: regsvr32 %WINDIR%\System\lvbuttons.ocx
or type: regsvr32 %WINDIR%\SysWOW64\lvbuttons.ocx - if youre 64 bit
uh hey Billy.. where do i find this :-[ C:\WINDOWS\SysWOW64 folder? im using vista 64 bit thanks.
nvm Bob, i found it.. and when i run it it says: The module "C:\Windows\SysWOW64\lvbuttons.ocx" was loaded but the call to DllRegisterServer failed with the error code 0x80004005. For more information about this program, search online using the error code as a search code. PLEASE BILLY BOB I NEED YOUR HELP!! thanks Joe
Youre not registering it with administrative privileges. Please reference http://www.mydigitallife.info/the-call-to-dllregisterserver-failed-with-error-code-0x80004005-on-windows-vista/ (http://www.mydigitallife.info/the-call-to-dllregisterserver-failed-with-error-code-0x80004005-on-windows-vista/)
i got the same msg when i ran the command thing as admin... please help me kelly
Double check to see if you are running it as admin. Try right click - run as admin. If that fails give this a go. From the responses from others it seems to have solved their problems.
http://social.msdn.microsoft.com/Forums/en-US/jscript/thread/b7d1a35f-3759-4217-91ba-e4416ac19d78/ (http://social.msdn.microsoft.com/Forums/en-US/jscript/thread/b7d1a35f-3759-4217-91ba-e4416ac19d78/)
Quote
Same here. NOTHING worked for me, until I found this nifty little solution. Here it is ; )
1) download SubInAcl at http://www.microsoft.com/downloads/details.aspx?FamilyId=E8BA3E56-D8FE-4A91-93CF-ED6985E3927B&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyId=E8BA3E56-D8FE-4A91-93CF-ED6985E3927B&displaylang=en)
2) Go to C:\Program Files\Windows Resource Kits\Tools (you can paste this into your browser to go there) and create a notepad file called reset. Paste this into the file:
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=system=f
3) save the file as reset.cmd Remember to change the file type to "all files" and not just "Text"
4) a reset command should show up, run it.
After you let the command finish running, the 0x80004005 error should be taken care of
Frank, did this solve your problem?
WOW JESUS THANK YOU... i thought u were going to fuck my computer half way during the loading thing.. now i can finally advertise my porn sites on starcraft i joke and yes Henry it solved the problem :)
if you need anymore assistance visit us on irc.darkblizz.org #darkblizz or find me on battle.net